一类非定常对流占优扩散问题差分-流线扩散法的后处理

讨论了一类非定常对流占优扩散方程的差分-流线扩散格式(FDSD),利用插值后处理技术,提高了特殊网格下该FDSD格式在双线性元空间的精度,从而按L∞(L2(Ω) 模达到最优．     

FREE DEFORMATION RETRACTION IN INJECTIVE METRIC SPACES

In this paper the authors establish the concept of generalized ball-intersection (GBI) and prove that an injective metric space is freely contractible to its each GBI, which generalizes a result of Isbell from a point to a GBI.     

On a micro‐macro model for polymeric fluids near equilibrium

In this paper, we study a micro‐macro model for polymeric fluid. The system involves coupling between the macroscopic momentum equation and a microscopic evolution equation describing the combined effects of the microscopic potential and thermofluctuation. We employ an energetic variation procedure to explore the relation between the macroscopic transport of the particles and the induced elastic stress due to the microscopic structure. For the initial data not far from the equilibrium, we prove the global existence and uniqueness of classical solutions to the system. © 2006 Wiley Periodicals, Inc.     

Microelectromagnet for magnetic manipulation in lab-on-a-chip systems

We demonstrate a simple scheme for fabrication of microelectromagnets consisting of planar spiral coils semi-encapsulated in soft magnetic yokes using conventional microfabrication techniques. The microelectromagnets are suitable for applications operating at frequencies below 250 kHz. Conventional fabrication schemes for planar microelectromagnets typically rely on five mask steps. We allow the current to flow in the soft magnetic yoke and thereby two mask steps are eliminated. We have characterized the electromagnets electrically, the results agree well with theory, and the implications arising from current flowing in the magnetic yoke are discussed. We have integrated the microelectromagnets with microfluidic channels, and demonstrated separation of commercially available magnetic beads from a fluid in a microfluidic system, i.e. a lab-on-a-chip system.     

Hydrothermal synthesis and Magnetocaloric effect of La0.5Ca0.3Sr0.2MnO3

The hydrothermal synthesis and magnetic entropy change for the perovskite manganite La_0.5Ca_0.3Sr_0.2MnO₃ have been studied. The La_0.5Ca_0.3Sr_0.2MnO₃ can be produced as phase-pure, crystalline powders in one step from solutions of metal salts in aqueous potassium hydroxide solution at a temperature of 513 K in 72 h. Scanning electron microscopy shows that the materials are made up of cuboid-shaped particles in typical dimension of 4.0×2.5×1.6 μm. Heat treatment can improve the magnetocaloric effect for the hydrothermal sample. The maximum magnetic entropy change ΔS_M for the as-prepared sample is 0.88 J kg⁻¹ K⁻¹ at 315 K for a magnetic field change of 2.0 T. It increases to 1.52 J kg⁻¹ K⁻¹, near its Curie temperature (317 K) by annealing the sample at 1473 K for 6 h. The hydrothermal synthesis method is a feasible route to prepare high-quality perovskite material for magnetic refrigeration application.     

热容模式下激光介质的动态光学畸变

 开展了热容模式下激光介质动态光学畸变研究，初步分析了温度梯度、光弹效应及介质端面变形对整个波前畸变带来的影响，并将光学畸变转化为谐振腔损耗，数值模拟了热容激光器输出功率随时间的变化规律，模拟结果表明：当激光器工作温度低于400 K时，由粒子数玻耳兹曼分布引起的功率下降可以忽略，动态热效应是实验中热容激光器输出功率随时间快速下降的原因。     

过量Zn对β-Zn4Sb3热电性能影响的研究

采用真空熔融缓冷方法制备了单相β-Zn4Sb3以及含有过量Zn的β-Zn4Sb3块体热电材料.在300—700K的温度范围内测试了材料的电导率、Seebeck系数和热导率,研究了β-Zn4Sb3化合物中过量Zn的分布状态及其对材料热电性能的影响规律.结果表明：过量的Zn作为第二相较均匀的分布在β-Zn4Sb3的晶界上,随着Zn含量增加,材料电导率和热导率上升,Seebeck系数下降,Zn第二相的引入能有效提高材料的功率因子,Zn过量2at%的材料在700K时其ZT值达到1.10.     

二维随机激光器的模式选择及阈值与饱和特性

基于将Maxwell方程与四能级原子系统速率方程相结合而建立起随机激光时域理论，并利用有限时域差分法，研究了二维随机介质中激光模式的输出特性与介质尺寸、外形及抽运速率等参数的关系.结果表明，与传统激光模式相似，随机激光模式的强度随抽运速率的变化不仅具有阈值特性，而且具有饱和特性.基于模式特性对介质及抽运参数的依赖关系，提出了二维随机激光器的选模方式，在很大程度上不同于传统激光器的选模方式. 关键词： 随机激光器 模式选择 无序介质中的光学特性